A few factors have come together to get me more involved/interested in making more of my fleet of RC planes a bit more realistic in appearance and flying them to match. It’s hard to separate which are drivers of this and which are downstream effects in some way. Here’s a list of what I’ll call contributors to the trend.
First, I have been doing some 3D printing for a few years now and I’ve moved from having a 3D printer more as a hobby of its own, to having it be more of a tool that feeds or is used in other pursuits.
Another is my interest (always present at some level) in history and historical aircraft, especially in the P47 since my grandfather played a part in building them at the production facility in Evansville, Indiana in the mid-late 1940s.
Of course, my interest in all things that fly but especially in RC planes is obvious, but the availability of less expensive, electric powered warbirds has certainly increased in the last decade, making a variety of easy to fly specimens readily available.
Finally, the interest of several club members in my local RC club in scale competition has brought it to my attention and made it easier for me to absorb some local knowledge and just exposed me to the genre in more detail. Their interest has driven our club to offer hosting a scale competition at our flying field this coming fall (2027).
I hadn’t really planned it, but the vast majority of my flying time is now in airplanes that to some level are scale representations of “real” or what I would call full-scale aircraft. I have a few that are RC only model designs, but they don’t get the flying time of my scale birds.
To this end I have decided to take a shot at a true scale flying competition since it is coming to me! Of course, this is a great reason to go purchase a new RC plane that I will more or less dedicate to the upcoming competition. I considered using one of my current flock but with my vague knowledge of what this entails I wanted to have a clean slate to work with rather than modifying something I already own. I also wanted to consider what would make a good competition airplane for my first shot without limiting my options to what I have.
To that end I looked at a number of aircraft. A J-3 Cub is an obvious, easy choice but they are very limited in what you can do if you fly it truly scale and I’ve been there, done that so it doesn’t hold much interest for me. I also considered another P47 or perhaps a Decathlon but nothing really jumped out at me that I felt would be a good one for this first run. I looked at a couple swap meets and perused the major suppliers but couldn’t settle on anything… until I saw that Hangar 9 had re-released a version of the 15cc Carbon Cub SS. I had one of the original silver and yellow versions until maybe a year ago, but it got supplanted by the Turbo Timber SWS and without a real reason to keep it around… it got culled from the herd. As far as just sport flying and general performance as well as maneuverability, the TT SWS outshone it in every way. For my purposes now, the TT SWS is useless as it does not represent a full-scale aircraft and with the updates in the new version the Carbon Cub does away with a couple of the things I didn’t like about version I. The big differences are the easier battery swapping afforded by the new front/top hatch and the ease of setup and storage due to a change that makes the struts much less of problem to fold down for storage. These might seem like small things, but they make a big difference in overall ease of use.
So, after some debate and further research, I decided the new Carbon Cub should fit the bill quite well.

Based on my familiarity with version I, I knew it was a quality airplane though maybe a tad heavy, especially as the full-scale aircraft is very light for its size. Knowing that, I’ll do what I can to shave a few ounces where I can and make sure it has a generous power to weight ratio by installing a bit of extra umph up front. To that end, I happen to have a complete power system (ESC, Motor and Prop) from another airplane that I recently parted out and it’s probably the most powerful 6S system I’ve ever run. It will definitely be an upgrade over the stock system you’d get if you bought the CC in full BNF format… which is already adequate! Who needs adequate anyway? I can also use a lighter battery pack to aid the cause as long flights and high throttle will not be the rule with this bird. Hopefully with that I can at least make it look like its flying similar to the full-scale version!
With all that in mind, after making a bit more room in the hangar and ensuring my hobby budget was adequate for the project I placed the order for the ARF version of this aircraft and a few days later received the new Carbon Cub. Over the next few weeks or months, I will post a few more times on this topic as I unpack, assemble and make decisions on RC gear and any scale updates I decide I “need” on this bird. This should be fun.
